| Operating
Weight |
|
Cabin,
steel tracks/rubber shoes - 9030kg |
Engines |
|
Kubota
V2003T turbocharged water cooled engine 41.8kW @ 2800 rpm (56bhp) |
Electrics |
|
12
Volt system |
Hydraulic
System |
|
Pump
- Tandem Load sensing variable displacement, max. flow 140 litres/min,
max. pressure 280 bar. |
|
Track
Motors - Two speed axial piston motor gearbox + cross line relief + fail
to safe park brake |
|
Slew
Motor - Axial piston motor/gearbox + crossline relief + fail to safe park
brake |
|
Winch
Motor - Gear motor/gearbox + overcentre + automatic fail to safe break |
|
Derricking
Ram - 125mm (5") double acting + built-in dual overcentre valve |
|
Telescoping
Ram - 2 x 80mm (3.14") Double acting and built-in dual overcentre valves |
|
Hydraulic
Power Take Off (PTO) - (Optional) 29 1/[email protected] 140bar (7.6 US galls/min @ 2060
psi) |
|
Stabilisers
- 4 x 100mm (4") |
|
Rams
- Double acting + dual Pilot operated checks |
|
Filtration
- 10 microns absolute return line filter |
Controls |
|
Electric-hydraulic
proportional |
|
Double
acting circuits |
|
2
x 4 way joystick control for derrick, telescope, winch and slew |
|
|
Hand
lever control for tracks |
|
Interchanging
with boom and winch control 4 x switch control for stabiliser legs |
Safety Devices |
|
Full
safe load indicator, A2B block to block control |
|
Winch
wire out cutout |
|
Armchair
lever control cutout on operator entry/exit |
|
Mechanical
slew lock pin (operated from within cab) |
|
Total
moment cutout limiter available (optional) |
|
Safety
valves throughout all lift functions and fail to safe brakes |
Performance
Data - Boom |
|
See
full load chart in operators manual for complete range of duties |
|
Boom
- retracted - 4350mm (14' 3") |
|
|
Boom
- extended - 12600mm (41' 4") |
|
4
stage boom, 2 stages - hydraulic cylinder operated, 1 stage - wire rope
operated |
|
Maximum
height under hook 12.5 metres |
|
Boom
angle - 0-73° |
|
Derricking
time - 15 seconds (0-73°) |
|
Up:
20 seconds, Down: 19 seconds |
|
Telescoping
time - Out: 37 seconds, In: 34 seconds |
|
Hoisting
speed - 40 metres/minute |
|
Wire
rope - 110mm x Ø13mm |
|
Wire
rope - 48M drop on 2 falls |
|
Wire
rope - 24M drop on 4 falls |
Machine
Overall Dimensions |
|
Width
2235mm, Length 5680mm, Height 2550mm |
|
|
Tail
Rad. 1560mm, Legs deployed footprint 3480 x 3480mm |
Slew |
|
Continuous
360° at 3.0 RPM |
Gradability |
|
32 degrees
- (58%) |
Travel Speed |
|
0 - 4 k/h |
Track Equipment |
|
Standard specification
- Steel tracks with bonded rubber shoes 135mm pitch |
|
12 bottom rollers
(6 per side) |
|
2 top rollers
(1 per side) |
|
Shoe width
400mm (16") |
|
Ground Length
1925mm (6'4") |
|
Ground
Pressure 0.58 KG/CM2 (8.35lbs/in2) |
Instruments |
|
Gauges for
water temperature, engine oil pressure, warning lights for hydraulic filter
bypass, hourmeter, machine levelling indicator, safe load indicator |
Fuel Tank
Capacity |
|
95
litres (25.0 US galls) |
Hydraulic
Reservoir |
|
160
litres (42.3 US galls) |
Optional
Equipment |
|
Cab
air conditioning |
|
Steel
track undercarriage |
|
All
rubber track |
|
Dual
fail to safe on winch |
|
Fly
jib 5.0m (16'4") |
|
N.B.
All non metric dimensions, areas, volumes, pressures and weights are approximations
only. |
